Bukwit‎ > ‎River‎ > ‎

SSC Junior Engineer Exam | Syllabus | Best Books

posted 1 Mar 2013, 12:01 by Bukwit   [ updated 15 Nov 2017, 10:46 ]
SSC Junior Engineer Exam (Civil / Mechanical / Electrical / Quantity Surveying and Contract)
This post will give you a short preview of the SSC JE Exam with important dates, online application form, syllabus and the preparation and reference books for the exam. The closing date of SSC Junior Engineer (JE) is 17/11/20147. And the date of Computer Based Written Exam : 05/01/2018 to 08/01/2018. Download the official notification.

Staff Selection Commission (in short SSC) will be conducting all India level competition examination for the recruitment to the post of:

Organisation   Post 
Central Water Commission (CWC)Junior Engineer (Civil) 
Central Water Commission (CWC)Junior Engineer (Mechanical) 
CPWDJunior Engineer (Civil) 
CPWD Junior Engineer (Electrical) 
Department of PostJunior Engineer (Civil)
MES Junior Engineer (Civil) 
MES Junior Engineer (Electrical and Mechanical) 
MES Junior Engineer (Quantity Surveying and Contract)
Farrakka Barrage (Project) Junior Engineer (Civil) 
Farrakka Barrage (Project)Junior Engineer (Electrical) 
Farrakka Barrage (Project) Junior Engineer (Mechanical) 
Director General Border Roads Organisation Junior Engineer (Civil) 
Director General Border Roads Organisation Junior Engineer (Electrical)
Director General Border Roads Organisation Junior Engineer (Mechanical) 
Central Water Power Research Station Junior Engineer (Civil) 
Central Water Power Research StationJunior Engineer (Electrical/Mechanical) 
Dte. Of Quality Assurance (Naval)Junior Engineer (Naval Quantity Assurance) – (Mechanical)
Dte. Of Quality Assurance (Naval) Junior Engineer (Naval Quantity Assurance)- (Electrical) 
National Technical Research Organisation Junior Engineer (Civil) 
National Technical Research Organisation Junior Engineer (Electrical) 
National Technical Research Organisation Junior Engineer (Mechanical) 

Candidates who have Degree or Diploma in Civil or Electrical or Mechanical Engineering from recognised institution can apply for  the SSC Junior Examination.

SSC Junior Engineer Exam Syllabus

The SSC Junior Engineers Exam will be held in two stages: Written exam (it will be 500 marks) and Interview (100 marks). The written examination will be both objective (i.e., Paper I) and conventional (Paper II).
Papers Subject
Paper-I
Objective type
(i) General Intelligence &
Reasoning (50 No. of questions ; 50 Marks) 
(ii) General Awareness (50 No. of questions ; 50 Marks)
(iii) Part –A
General Engineering (Civil & Structural) (100 No. of questions ; 100 Marks)
OR
Part-B
General Engineering (Electrical)
OR
Part-C
General Engineering (Mechanical) 
Paper-II
Conventional
Type
Part –A General Engineering  (Civil & Structural) (300 Marks)
OR
Part – B General Engineering (Electrical)
OR
Part-C General Engineering (Mechanical)

Paper-I Syllabus

(i) General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidate‘s abilities to deal with abstract ideas and symbols and their relationships, 
arithmetical computations and other analytical functions.
(ii) General Awareness: Questions will be aimed at testing the candidate's general awareness of the 
environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.

(iii) General Engineering (Civil and Structural), (Electrical & Mechanical):
Part-A
Civil Engineering 
Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.
Structural Engineering – Theory of Structures, Concrete Technology, RCC Design, Steel Design.
Part-B
Electrical Engineering 
Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.
Part-C
Mechanical Engineering – Theory of Machines and Machine Design, Engineering Mechanics and 
Strength of Materials, 
Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines.Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steels.

Paper-II Syllabus

Part-A
Civil & Structural Engineering
Civil Engineering 
Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.
Estimating, Costing and Valuation : estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson‘s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of 
valuation.
Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.
Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg‘s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.
Hydraulics : Fluid properties, hydrostatics, measurements of flow, Bernoulli‘s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines. 
Irrigation Engineering : Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy‘s theory of critical velocity. Lacey‘s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.
Transportation Engineering : Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, 
Railway Engineering - Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic  signals, traffic operation, traffic signs and markings, road safety. 
Environmental Engineering : Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.
Structural Engineering
Theory of structures : Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.
Concrete Technology : Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.
RCC Design : RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).
Steel Design : Steel design and construction of steel columns, beams roof trusses plate girders.
Part-B
Electrical Engineering 
Basic concepts : Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units.
Circuit law : Kirchhoff‘s law, Simple Circuit solution using network theorems. 
Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction.
AC Fundamentals : Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.
Measurement and measuring instruments : Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection.

Electrical Machines : (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, 
principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics.
Fractional Kilowatt Motors and Single Phase Induction Motors : Characteristics and applications.
Synchronous Machines - Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.
Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system. Cable – Different type of cables, cable rating and derating factor.
Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules.
Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.
Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.
Part- C
Mechanical Engineering 
Theory of Machines and Machine Design
Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots. 
Engineering Mechanics and Strength of Materials
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler‘s and Rankin‘s theories, Thin walled pressure vessels.
Thermal Engineering 
Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. h-s chart of steam (Mollier‘s Chart).
1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.
2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.
Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.
IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication. Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.
Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.
Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines
Fluid Mechanics & Machinery 
Properties & Classification of Fluid : ideal & real fluids, Newton‘s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.
Fluid Statics : Pressure at a point.
Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube. 
Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation.
Dynamics of ideal fluids : Bernoulli‘s equation, Total head; Velocity head; Pressure head; Application of Bernoulli‘s equitation. 
Measurement of Flow rate Basic Principles : Venturimeter, Pilot tube, Orifice meter. 
Hydraulic Turbines : Classifications, Principles.
Centrifugal Pumps : Classifications, Principles, Performance.
Production Engineering 
Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes. 

SSC Junior Engineer Exam Mechanical Books

Get complete list of best preparation and reference books for SSC Junior Engineer Mechanical from publishers like GK Publications, Ramesh Publishing House and others.

For subject specific books, visit Junior Engineer Exam books section

To order or for any other query, mail at contact@bukwit.com

SSC Junior Engineer Exam Mechanical Engineering Sellf Study Guide cum Practice Work Book (Computer Based Online Exam) [Publication Year 2017]
Medium: English
Publisher: Kiran Prakashan
Code / ISBN No: KP2052
Price: Rs 595
BUY
SSC (CWC/MES) Mechanical Engineering for Junior Engineers Guide 2017
Medium: English
Publisher: GK Publications
Code/ ISBN No.: 9788183555463
Price: Rs 395
BUY
 
 
SSC Junior Engineer Mechanical Engineering Paper 1 (CPWD/MES) Recruitment Examination 2016 [with 3 Mock Tests] [Publication Year 2016]
Publisher: Arihant
Code / ISBN: J666 / 9789351764168
Price: Rs 255
BUY
 
 
SSC Junior Engineer Chayan Pariksha Mechanical (Hindi)
Medium: Hindi
Publisher: Vidya Prakashan
Price: Rs 710
BUY
 
 
SSC Junior Engineers Exam Mechanical Engineering Latest Edition
Medium: English
Publisher: Ramesh Publishing House
Code / ISBN No.: R-1511 / 978-93-5012-279-2 / 9789350122792
Price: Rs 395
BUY
 


SSC Junior Engineer Exam Electrical Books

Get complete up-to-date list of best preparation and reference books for SSC Junior Engineer JE Electrical Engineering 
 
SSC (CPWD/CWC/MES) Electrical Engineering 10 Solved Papers & 10 Practice Papers for Junior Engineers 2017
Medium: English
Publisher: GK Publications
Code / ISBN No:  9788183554770
Price: Rs 325
BUY
 
SSC (CPWD/CWC/MES) Electrical Engineering for Junior Engineers Guide 2017
Medium: English
Publisher: GK Publisher
Code/ ISBN NO.: 9788183555456
Price: Rs 450
BUY
 
 
SSC (CPWD/CWC/MES) Electrical Engineering (Junior Engineers) 10 Solved & 10 Practice Sets (Hindi)
Medium: Hindi
Publisher: GK Publisher
Code / ISBN No.: 9789386601018
Price: Rs 325
BUY
 cover image is indicative
SSC Junior Engineer Exam Electrical Engineering Self Study Guide cum Practice Work Book (with Solved Papers 2013-2017)
Medium: English
Publisher: Kiran Publications
Code/ ISBN No.: KP2051
Price: Rs 525
BUY
 

SSC : Junior Engineer Exam Electrical (Paper-II : Conventional) : Previous Years' Papers (Solved) [Publishing Year 2017]
Medium: English
Publisher: Ramesh Publishing House
Code / ISBN No.: R-1833 / 9789350128299
Price: Rs 110
BUY
 
SSC : Junior Engineer Exam Electrical (Paper-II : Conventional) : Previous Years' Papers (Solved)
[Publishing Year 2017]
Medium: English
Publisher: Ramesh Publishing House
Code / ISBN NO.: R-1833 / 9789350128299
Price: Rs 110
BUY

To order, or for any other query, mail at contact@bukwit.com

SSC Junior Engineer Exam Civil Engineering Books


SSC (CPWD/MES) Civil Engineering for Junior Engineers Guide 2017
Medium: English
Publisher: GK Publications
Code/ ISBN No.: 9788183554954
Price: Rs 595
BUY
 
SSC Junior Engineer Chayan Pariksha Civil (Hindi)
Medium: Hindi
Publisher: Vidya Prakashan
Code / ISBN NO.: VPR258 / 9789350668023
Price: Rs 650
BUY
 
 
SSC Junior Engineer - Civil Engineering Paper 1 (CPWD/ CWC / MES) Recruitment Examination
Medium: English
Publisher: Arihant
Code / ISBN No. J667 / 9789351764366
Price: Rs 375
BUY
 
SSC Junior Engineers Exam (Civil and Structural | Quantity Surveying & Contract) Latest Edition
Medium: English
Publisher: Ramesh Publishing House
Code / ISBN No.: R-559 / 978-93-5012-577-9 / 9789350125779
Price: Rs 365
BUY
 
 
SSC Junior Engineer Civil & Structural (Paper-II : Conventional) Previous Years' Question Papers (Solved)
Medium: English
Publisher: Ramesh Publishing House
Code / ISBN No.: R-1828 / 978-93-5012-821-3 / 9789350128213
Price: Rs 110
BUY